T-200 Cable and Pipe Locator

T-200 Cable and Pipe Locator

Introduction:

T-200 Cable and Pipe Locator consists of a transmitter and a receiver, it can be used to locate trace and depth of the underground cables and metallic pipes, it can also be used to identify the cable from a group of cables.

Specifications:

• Transmitter:
• Output
  Direct connection output
  Clamp coupling output
  Radiation output
• Output frequency
  Pipe tracing frequency: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, and 93kHz. Here 500Hz and 1kHz are complex frequency.
  Fault locating: 8Hz very low complex frequency.
• Output power
  For 500Hz, 1kHz, 8kHz, 33kHz, and fault locating frequency, the power consumption is max. 10W, four steps adjustable (2.5W, 5 W, 7.5 W and 10 W).
  For 66kHz and 93kHz, the power consumption is 1W.
• Output voltage:Max. 200V, it can be adjusted according to the load.
• Impedance matching:Fully automatic.
• Overload and short protection:Fully automatic.
• HMI:12864 dots LCD.
• Internal battery:Lithium cell battery, 14.8V.
• External power supply
  Rated voltage 12VDC
  Cigar lighter of car output
• Charger:Input: AC100V, 50z;Output: DC16.8V, 2A.
• Working condition
  Temperature: -10+40
  Humidity: 5-90H
  Altitude: <4500m
• Dimension(mm):275220100 for the main unit.
• Weight:2.4kg for the main unit.
• Receiver:
• Signal input
  Internal receiving loop
  Clamp
  1k Mini Sensor
  8k Mini Sensor
  A Frame support
• Receiving frequency
  Active detection frequency for Pipes:500Hz, 1kHz, 8kHz, 33kHz, 66kHz, and 93kHz.
  Passive detection frequency for Pipes:Power frequency Radio frequency (RF).
  Clamp identification frequency:500Hz complex frequency.
  Clamp current measurement frequency:500Hz, 1kHz, 8kHz
  Mini sensor identification frequency:1kHz, 8kHz
  Grounding fault locating frequency:8Hz complex frequency
• Pipe detection mode
  Intelligent Peak Method (Wide): Suitable for active detection.
  Peak Method: Suitable for passive detection.
  Narrow Method.
  Null Method.
• Cable Identification mode
  Clamp intelligent identification.
  Clamp current measurement.
  Mini sensor identification.
• Human-machine Interface:320240 LCD
• Internal battery:Lithium cell battery, 7.4V, 7Ah.
• Charger:Input: AC100V, 50z; Output: DC 8.4V, 2A/3A.
• Dimensions (w x h x d):700mm270mm120mm (main unit)
• Weight:3.5kg (main unit)
• Working condition
  Temperature: -10+40
  Humidity: 5-90H
  Altitude: <4500m

Features:

• Transmitter:
• Three output modes
  Direct connection output
  Clamp coupling output
  Radiation output
• Six Frequencies to choose: 500Hz,1kHz, 8kHz, 33kHz, 66kHz, and 93kHz.
• Fault signal output is used to detect Pipe grounding fault.
• High power output: max.10W
• Fully automatic impedance matching and protection.
• Flexible power supply: Internal rechargeable lithium cell battery, it can be recharged via the charger (220V) or cigar lighter in car (12V).
• Low power shutdown function.
• Portable and strong case.
• Receiver:
• Left / Right arrow indication for cable route tracing.
• Right/Wrong indication: Patented technology for avoiding the nearby and cross cables confusion.
• High ability of anti-interfering.
• Automatic depth and current detection.
• Multiple detection methods
  Traditional Peak Method (wide)
  Null Method
  Narrow Method
• Two passive detection frequency bands
  Power frequency
  Radio frequency (RF)
• History curve display.
• Cable Identification
  Clamp identification
  Mini sensor identification.
• Grounding fault locating.
• Internal rechargeable lithium cell battery.
• Auto shutdown function.
• Portable case.

Delivery Include:

• T-200 Transmitter
• T-200 Receiver
• Direct Connect Test Lead (clamp)
• Transmitter Clamp
• Receiver Clamp
• Charger
• Grounding Pin
• Carrying Bag
• Manual